Adward Posted February 19, 2010 Share Posted February 19, 2010 Produits linguistiques dans le processus de conversion, il ne peut pas être ouverte, dans l'environnement de IE6 Link to comment Share on other sites More sharing options...
Adward Posted February 19, 2010 Author Share Posted February 19, 2010 Come from W3C report is bellow: Line 627, Column 24: cannot generate system identifier for general entity "id_product_attribute" data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(),✉ An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (. The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs". Entity references start with an ampersand (&) and end with a semicolon (. If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters. If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem. Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed. Line 627, Column 24: general entity "id_product_attribute" not defined and no default entity data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(),✉ This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details. Line 627, Column 44: reference not terminated by REFC delimiter data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(),✉ If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text. Line 627, Column 44: reference to entity "id_product_attribute" for which no system identifier could be generated data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(),✉ This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details. Line 627, Column 22: entity was defined here data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(), Link to comment Share on other sites More sharing options...
Adward Posted February 19, 2010 Author Share Posted February 19, 2010 Line 632, Column 119: reference not terminated by REFC delimiter …p?id_product=12&id;_product_attribute='+$('#idCombination').val());✉ If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text. Line 632, Column 119: reference to entity "id_product_attribute" for which no system identifier could be generated …p?id_product=12&id;_product_attribute='+$('#idCombination').val());✉ This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details. Line 627, Column 22: entity was defined here data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(), Line 649, Column 44: reference not terminated by REFC delimiter … 'id_product=12&id;_product_attribute='+$('#idCombination').val()+'&customer;_e✉ If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text. Line 649, Column 44: reference to entity "id_product_attribute" for which no system identifier could be generated … 'id_product=12&id;_product_attribute='+$('#idCombination').val()+'&customer;_e✉ This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details. Line 627, Column 22: entity was defined here data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(), Link to comment Share on other sites More sharing options...
Adward Posted February 19, 2010 Author Share Posted February 19, 2010 Line 649, Column 75: cannot generate system identifier for general entity "customer_email" …ibute='+$('#idCombination').val()+'&customer;_email='+$('#oos_customer_email')✉ An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (. The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs". Entity references start with an ampersand (&) and end with a semicolon (. If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters. If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem. Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed. Line 649, Column 75: general entity "customer_email" not defined and no default entity …ibute='+$('#idCombination').val()+'&customer;_email='+$('#oos_customer_email')✉ This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details. Line 649, Column 89: reference not terminated by REFC delimiter …Combination').val()+'&customer;_email='+$('#oos_customer_email').val()+'',✉ If you meant to include an entity that starts with "&", then you should terminate it with ";". Another reason for this error message is that you inadvertently created an entity by failing to escape an "&" character just before this text. Line 649, Column 89: reference to entity "customer_email" for which no system identifier could be generated …Combination').val()+'&customer;_email='+$('#oos_customer_email').val()+'',✉ This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details. Line 649, Column 73: entity was defined here …tribute='+$('#idCombination').val()+'&customer;_email='+$('#oos_customer_email Link to comment Share on other sites More sharing options...
Adward Posted February 19, 2010 Author Share Posted February 19, 2010 Line 681, Column 71: document type does not allow element "link" here …growl.css" rel="stylesheet" type="text/css" />✉ The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed). One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error). Line 627, Column 43: XML Parsing Error: EntityRef: expecting ';' data: 'id_product=12&id;_product_attribute='+$('#idCombination').val(),✉ Line 632, Column > 80: XML Parsing Error: EntityRef: expecting ';' …, 'modules/mailalerts/mailalerts-add.php?id_product=12&id;_product_attribute='…✉ Line 649, Column 43: XML Parsing Error: EntityRef: expecting ';' …: 'id_product=12&id;_product_attribute='+$('#idCombination').val()+'&customer;_✉ Line 649, Column > 80: XML Parsing Error: EntityRef: expecting ';' …='+$('#idCombination').val()+'&customer;_email='+$('#oos_customer_email').val(… Link to comment Share on other sites More sharing options...
Fabrice Posted February 19, 2010 Share Posted February 19, 2010 c'est quoi ça ?on n'y comprend rien... à peine une ligne d'explications incompréhensible ?merci de compléter - ça ne sert à rien de poster sous cette forme.. Link to comment Share on other sites More sharing options...
Adward Posted February 19, 2010 Author Share Posted February 19, 2010 Dear SirPrestaShop v.1.3 alpha 1 releaseAdward Link to comment Share on other sites More sharing options...
Patric Posted February 19, 2010 Share Posted February 19, 2010 Merci de ne poster qu'en français dans les forums français.Et merci de faire des sujets explicites.Topic fermé. Link to comment Share on other sites More sharing options...
Recommended Posts