Jump to content

DKK

Members
  • Posts

    16
  • Joined

  • Last visited

Profile Information

  • First Name
    Deniz

DKK's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. Hi all, I put my website online and tried to some improvement using google tools along with "Google webmaster tool". My website catalog was created using manufacturer products and has been saved all information needed as well as meta tags, meta description etc. After checking webmaster tool, I saw my website as full spam. I hope you put me in right direction in order to make it visible on google search. My website is : http://bit.ly/2jRT7zA
  2. Hi all, I want to update product prices in the combinations. So far I have added products like in the following: By creating products if the products has combinations; I left blank 'reference code' of the product in the information tab I filled 'reference code' in the combinations of each product. How can I update produt prices of combinations at once? and by creating combinations, is it OK to do it? I would be greateful if you could help on it.
  3. Thanks for the clarification. Let me ask you this issue as well. After turning on the smarty cache, I get error on administration -> permissions tab. Is it also known issue?
  4. Hi all, I am using version 1.6.1.7. Firstly, on product details page, normally if you hit the "Save" button, it should take you the page on where products are listed which is 50 products per page but suddenly on google chrome it stays on the same page after saving. Secondly, even though I have not touched customer -> customer service page, it is not displayed on google chrome. but boths issues I mentioned, if you ever try on firefox, it works normally as it is expected. So what might cause it? I cleared the cache also turned off caching.
  5. When I manually edit what you suggested, it works. I have already tried it but I have more than 1.000 product. Any way to edit automatically all products at once?
  6. Hi all, I have newly installed v 1.6.1.7. Under Preferences -> Products -> Product Stock -> Allow ordering of out-of-stock products is set to 'YES'. Under each product Quantities -> Quantity is set to 0. Moreover, In When out of stock section 'Deny Orders' is selected. How can I allow customer to order even though quantity is 0 or to update all products are set to more than zero at once? Because Allow ordering of out-of-stock products is set to 'YES' but it is still not available for order. Regards, Deniz
  7. Merhaba, Aşağıdaki satırı müşterinin isteği üzerine pasif hale getirmiştim. {addJsDefL name=doesntExistNoMore}{l s='This product is no longer in stock' js=1}{/addJsDefL} Şu aşamada kombinasyonlardaki referanslar gösteriliyor. Yalnız This product is no longer in stock yazısını nasıl tamamen görünür olmaktan kaldırabilirim
  8. Merhabalar, Kullandığım prestashop 1.6.1.4 ve temam ise default-bootstrap version 1.0'dir. Sitemde aşağıdaki linktede göreceğiniz gibi kombinasyonlu ürünlerin referanslarının gösterilmediğini farkettim. Yalnız daha önce böyle bir sıkıntı yoktu. http://www.homatex.com.tr/en/wide-shallow-pots/3575-helvane-tencere-kapakli.html Aynı şekilde kombinasyonu olmayan ürünlerde ise hiç bir sıkıntı yok referans kodu gösterilmekte. Örneği aşağıdaki linkte bulabilirsiniz. http://www.homatex.com.tr/en/pasabahce/525-flut-sampanya-44455.html İlk olarak product.tpl dosyasında müşterimin isteği üzerine refarans kodunun üstünde üretici ismini ekledim. Yalnız orjinal product.tpl dosyasını tekrar yüklediğim halde sonuç aynıydı. <div class="pb-center-column col-xs-12 col-sm-4"> {if $product->online_only} <p class="online_only">{l s='Online only'}</p> {/if} <h1 itemprop="name">{$product->name|escape:'html':'UTF-8'}</h1> <p> <label>{l s='Manufacturer:'} </label> <span itemprop="manufacturer_name">{$product->manufacturer_name|escape:'html':'UTF-8'}</span> </p> <p id="product_reference"{if empty($product->reference) || !$product->reference} style="display: none;"{/if}> <label>{l s='Reference:'} </label> <span class="editable" itemprop="sku"{if !empty($product->reference) && $product->reference} content="{$product->reference}"{/if}>{if !isset($groups)}{$product->reference|escape:'html':'UTF-8'}{/if}</span> </p> İkinci olarak Under Catalog-> Product Attributes linkinde bir çok attribute ekledim. Daha sonra çift kayıtların olduğunu farkettim. Teker teker hatalı kayıtları düzelttim. Örnek olarak Height attribute içinde 10.7cm iki kayıt vardı. Bu aynı adlı çift kayıtların kombinasyon referanslarını göstermemesi gibi bir durum söz konusu olabilir mi? Yada bu hata için nereyi kontrol etmek gerekir?
  9. It is default-bootstrap version 1.0 with the version of 1.6.1.4 so in this case it is not the problem which causes it. I try to narrow down the possibilities. Moreover, Reference codes were shown before even with combinations. All of a sudden it stopped showing it. What I have done might have caused it so I try to explained in the following. Firstly, I added a line based on my customer to product.tpl just above reference code showing manufacturer name but even though I replaced it with original product.tpl file, the result was the same. In this scenario, It is not the case I think. <div class="pb-center-column col-xs-12 col-sm-4"> {if $product->online_only} <p class="online_only">{l s='Online only'}</p> {/if} <h1 itemprop="name">{$product->name|escape:'html':'UTF-8'}</h1> <p> <label>{l s='Manufacturer:'} </label> <span itemprop="manufacturer_name">{$product->manufacturer_name|escape:'html':'UTF-8'}</span> </p> <p id="product_reference"{if empty($product->reference) || !$product->reference} style="display: none;"{/if}> <label>{l s='Reference:'} </label> <span class="editable" itemprop="sku"{if !empty($product->reference) && $product->reference} content="{$product->reference}"{/if}>{if !isset($groups)}{$product->reference|escape:'html':'UTF-8'}{/if}</span> </p> Secondly, Under Catalog -> Product Attributes link, I used to create lots of attributes. Later I realized there were also lots of duplicates records. Therefore, manually I tried to make it correct. For example under "Height" there were duplicate of 10.7 cm record. Do you think it might cause not to show reference code for combinations products. Because as I told you before, a product without combinations displays reference code only not with combinations. I hope that you could give me an ideon on this Regards, deniz
  10. Hi, In this scenario this is not the case. Reference is set in combinations and It used to work before. I can verify that all has a reference so in my case where do I need to check in order to solve it?
  11. Hi all, I have realized something weird on my webpage. When I look at product details on a product, there is a "reference" and "condition" section. If it is ever a single product without combinations, reference is displayed like in the following http://www.homatex.com.tr/en/bar-presentation/4343-boston-shaker.html If it is a combination, reference is not displayed at all like in the following http://www.homatex.com.tr/en/industrial-kitchen-equipments/15949-hamilton-beach-bar-blender.html I would be very greateful if you could help me on this, Regards, deniz
  12. Hi all, I was working on a HORECA (Hotel-Restaurant-Cafe Products) project. My version is 1.6.1.4 and theme is default-bootstrap version 1.0. Website is: http://www.homatex.com.tr/en/ You will see under "Products" link lots of categories and sub categories. I want to get the similar view using "Mega Menu" like under this link http://www.galerikristal.com.tr/otel-ekipmanlari What I want to accomplish is that Show only "main cagetories" using Mega Menu with photo. After that when you click "main category" it should display "manufacturer" logo which has a product on that category Lastly clicking upon "manufacturer", it should list products I would be very grateful if you could help me on it. Thanx
  13. Hi all, I have more than 20.000 products in my catalog and some of the details of products for example "Name" in English and "Image URL" is missing. What I would like to do is that export all products into a csv file, translate all missing names along with Image URL and import again into Catalog. When I try to use export function on "products" page of Prestashop, I get 404 error. I think it can not handle such a huge catalog. Is there any way for it? For example a simple way, or any module to manage it? Any help much appriciated. Thanks, Deniz
  14. Hi mdekker, I do not get any error about this problem.
×
×
  • Create New...