Jump to content
prestabeginner

" Myshop link " does not work after module installation

Recommended Posts

Hello everybody,

I have a massive problem after installing an invoice module because myshop is not working anymore.

I had to install the module manually using the Filezilla ftp program and I succeed, too.

 

But unfortunately I just figured out that the myshop-view does not work anymore.

All I get are errors and I can' t see the frontoffice of my shop anymore :(

It is very upsetting because it DID work before ans now I do not even why the problems occur.

 

I first got the:  " Internal Server error 500 " which can have many reasons.

Then I got the error screen: 0% An error occured (Screenshot below)

And from time to time I also get the error report, that APACHE is not working correctly.

 

I am really lost at this point and I would be very thankful for each kind of help because I am the only one here at the company who is responsible for the shop so i have no one to ask and to be honest I am not the best PS expert ://

 

Greetings.

fehlermeldung.PNG

Edited by prestabeginner

Share this post


Link to post
Share on other sites
On 17.12.2017 at 2:55 PM, NemoPS said:

Try to enable dev mode in config/defines.inc.php, see if anything more verbose  displays

 

Hi, 

sorry for my late reply, caught a cold..

so I tried to figure out if I could do that..

I enabled the dev mode like you said but there are no error reports even if I enable the debug modus like this.

So what am I supposed to do ?

 

The back office works fine, yes but the shop still can't be seen so far :((

Share this post


Link to post
Share on other sites
2 hours ago, NemoPS said:

Hmmm, strange, see if you have a file named error_log in your site's root

 

I just made a search in the root folder of my shop but unfortunately there was no file named " error_log " found so far :/

I just do not understand why this kind of problem occurs but I just figured out that it might be important that there is  another

report which says that apache is not working correctly.

This one occurs from time to time but not regularly.

Can it be that this problem is caused by apache ?

 

I use xampp on the localhost for my shop, sorry just figured out that I forgot to mention this before.

As you can see below the favicon on the tab is the one of xampp, so it might be an apache problem due to xampp.

Can this be possible by any chance ?

 

Greetings.

prestaproblem.PNG

Edited by prestabeginner

Share this post


Link to post
Share on other sites

Why dont you ask the developer of the invoice module to have a look at it? He/she would be probably willing to help you to solve the problem.

You can also delete the invoice module by ftp, probably the shop will be working again then.

Share this post


Link to post
Share on other sites
4 minutes ago, Curious said:

Why dont you ask the developer of the invoice module to have a look at it? He/she would be probably willing to help you to solve the problem.

You can also delete the invoice module by ftp, probably the shop will be working again then.

 

Hi and thanks for the reply :)

I already uninstalled the module a few times before actually posting the problem here but unfortunately it did not help.

I also contacted the developer team but they told me that the problem itself can not be due to the module.

So I wnated to figure out if it would help once I uninstall xampp in order to install it again. :/

But I am afraid I can't do this- it might be that I can not use my PS shop files and folders with xampp after the new installation.

 

I am already looking for a solution on the web.

Do you have any ideas or helpful links for me ? 

And thanks a lot for the reply, it's much appreciated.

Share this post


Link to post
Share on other sites
3 hours ago, NemoPS said:

It might be that. I never tried it on xampp, but you can see if wamp works instead

 

Thanks for the reply : )

But how can use or import my files and fodlers for my online shop in wamp if I install it ?

Share this post


Link to post
Share on other sites
1 minute ago, Curious said:

I dont know such as "the invoice module" there are dozens of them. You have a link to the module?

 

Sorry, my bad.

Yes, of course, this is the link: https://codecanyon.net/item/prestashop-customize-invoice-template-module/12984195?ref=doughseven&clickthrough_id=1158351741&redirect_back=true

 

It is from another company which are developping modules for Prestashop.

I contacted the team quite often :/

Share this post


Link to post
Share on other sites

yes, i know this developer. I bought this module also sometime ago. I have installed it at my shop and its working fine. Maybe there are other problems.

I think youre using 1.7 prestashop, so if you can reach your backoffice put it in debug: https://www.screencast.com/t/lzKInyn25

After done that watch your frontoffice what kind of errors it gives

 

 

PS. I am not a big fan of this developer, and especially not their after sales service. It costs lots of energy to let them have a look at your problem. To me it seems that they have the order to first reject 2 or 3 times a supportquestion :(

 

Addition: It also gives problems at my shop! Only not at the frontoffice, but when generating an invoice, after deinstalling it, the problems are over. Throw it away!

Share this post


Link to post
Share on other sites
5 minutes ago, Curious said:

yes, i know this developer. I bought this module also sometime ago. I have installed it at my shop and its working fine. Maybe there are other problems.

I think youre using 1.7 prestashop, so if you can reach your backoffice put it in debug: https://www.screencast.com/t/lzKInyn25

After done that watch your frontoffice what kind of errors it gives

 

 

PS. I am not a big fan of this developer, and especially not their after sales service. It costs lots of energy to let them have a look at your problem. To me it seems that they have the order to first reject 2 or 3 times a supportquestion :(

 

I am glad you know them- I actually had to be handed off to two different departments in order to get in contact with the right team.

Took me 4-5 days :/ But they were still kind and replied to my questions, so I'd like to give them credits for that at least.

The debug mode didn't give me any further help either, I still have the same error screen :/ 

 

Thanks a lot btw for helping me out, I seriously start to think that it must be the apache problem

due to the xampp version I installed.

It's just a little bit suspicious why it occured right after the module installation :D

debug-mode-on.PNG

identische-meldung.PNG

Share this post


Link to post
Share on other sites

well, its difficult to say whats happening. I only see a lot of modules who are doing almost the same? Do you use all those 8 installed modules? Maybe its an idea to disable them 1 by 1 and see what happens.

Also clear your cache! : https://www.screencast.com/t/gBfeoHwp

Also do this: https://www.screencast.com/t/hoHSKP4LcoEE

1. set friendly url to no: save

2. set friendly url to yes: save

It creates a new htacces

 

Maybe give a screenshot about your systemeinstellungen: https://www.screencast.com/t/qWgWqbPJD

It gives also info

 

 

Share this post


Link to post
Share on other sites
18 minutes ago, Curious said:

well, its difficult to say whats happening. I only see a lot of modules who are doing almost the same? Do you use all those 8 installed modules? Maybe its an idea to disable them 1 by 1 and see what happens.

Also clear your cache! : https://www.screencast.com/t/gBfeoHwp

Also do this: https://www.screencast.com/t/hoHSKP4LcoEE

1. set friendly url to no: save

2. set friendly url to yes: save

It creates a new htacces

 

Maybe give a screenshot about your systemeinstellungen: https://www.screencast.com/t/qWgWqbPJD

It gives also info

 

 

 

Well, I just cleared the cache and also set the user-freindly URL to no...

But this happened:

 

bootstrap-meldung.PNG

 

Stopped both, Apache and MySql and restarted them: works again fortunately.

But the deleting the cache does not help either I guess. :( 

 

Edited by prestabeginner

Share this post


Link to post
Share on other sites
27 minutes ago, Curious said:

well, its difficult to say whats happening. I only see a lot of modules who are doing almost the same? Do you use all those 8 installed modules? Maybe its an idea to disable them 1 by 1 and see what happens.

Also clear your cache! : https://www.screencast.com/t/gBfeoHwp

Also do this: https://www.screencast.com/t/hoHSKP4LcoEE

1. set friendly url to no: save

2. set friendly url to yes: save

It creates a new htacces

 

Maybe give a screenshot about your systemeinstellungen: https://www.screencast.com/t/qWgWqbPJD

It gives also info

 

 

 

By the way: here is an overview of the system information at the BO:

Seems actually to be fine with all of the settings and I use all modules except for Stripe, that's why I just uninstalled it right now.

 

But still no success at all.

informationen.PNG

Share this post


Link to post
Share on other sites
37 minutes ago, Curious said:

looks fine indeed, maybe you can try another php version, 7.026 for example

 

That's where the problem occurs: I use Prestashop with xampp (on localhost). And therefore I can't update or install or change PHP or any other part of xampp separately :(

 

So the only solution would be: Uninstall xampp and reinstall it again.

But I am afraid that it will not work anymore once I do so.

 

Question: What steps do I have to follow in order to save my SHop- folders and files

(modules, templates, desings, settings etc. like everything connceted to my current shop),

so that I can use or implenment them in the new xampp version?

 

Thank you so much once again.

Share this post


Link to post
Share on other sites

unfortunately i dont have experience with xampp.

Normally i copy everything to an empty domain with a fresh install. And then put it all back, but i use a special module for that to make that easy. I dont know if thats working with xammp: https://addons.prestashop.com/en/data-migration-backup/20130-nt-backup-and-restore.html

But there are also step by step tutorials how to backup and restore manually on the forum.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×