Search the Community

Witam, Problem polega na tym, że po włączeniu "Zaawansowanego zarządzania produktami" (w kartce produktu), na magazynie każdą kombinację trzeba ręcznie dodać a potem usunąć żeby dostać "Ilość - 0", ponieważ bez tego pojawiają się same kreski: 112233 -- -- test -- -- Dowiedziałem się, że kiedy po protu zaznaczę "Chcę używać zaawansowanego zarządzania stanem magazynowym dla tego produktu" to nie generuje się też link w api/stocks/. Dlatego produkt się właśnie nie pojawia na magazynie jako "aktywny". Czy istnieje jakiś szybki sposób zainicjować wszystkie kombinacje wybranego produktu? Żeby, powiedzmy, po włączeniu "Zaawansowanego zarządzania produktami" na magazynie pojawiły się zerowe ilości zamiast kresek? Korzystam z API na PS 1.6.

Hi, Do you know plugins that would make all these options possible? We need to run a store that 28 locations: 1. Has several warehouses. Each country has its own warehouse, and its own stock level. 2. Customers from a given country can buy products only from a warehouse in that country. They can not access orders in other countries. 3. Each country has its list of orders. So the seller of country X does not see orders from country Y 4. Each country will have its language version. 5. Prices, taxes, displayed currencies can be different in each country Thank you for your help

Are warehouses available in 1.7? I installed the 1.7.4.2 and couldn't find the option to activate them. If not. Any plans on when will they be available?

Hi, I have been asked if I can generate two separate invoices when a customer checks out if the products in their cart are held in different warehouses. It's all to do with requesting payments for for each warehouse. It doesn't matter if we create two orders or one combined. Is this possible? Easy? Very difficult? Any help would be appreciated. Thanks, Chris

Is there a way to show the stock of each warehouse (our retail stores) on the product page? I cannot seem to find a module or an option to enable such a thing. Thanks!

I have been trying for weeks to successfully configure an installation of Prestashop 1.5.4.1 with multiple shops using advanced stock management with warehouses. I cannot get it to work! I've tried on a couple of different installations with no success. The warehouses seem to cross over each other when the stock levels are being calculated on a per-shop basis. The real stock value calculated is not correct and despite having positive inventories of stock in both warehouses (in a two warehouse install) the 2nd warehouse (not connected to default shop) often gives a negative value! eg. If I have 2 warehouses Warehouse 1: 100 x product A Warehouse 2: 10 x product A -> All warehouses - 110 x product A Warehouse 1 is only active for shop 1 (default) Warehouse 2 is only active for shop 2 as per warehouse settings Then I place an order for 20 x product A in shop 1. Instant stock status then shows ("Real quantity"): Warehouse 1: 80 x product A (100 - 20) Warehouse 2: -10 x product A (10 - 20) All Warehouses: 90 x product A (110 - 20) It appears that the real value calculation is subtracting the order amount from both warehouses so it is correct for the warehouse associated with shop 1 (which I ordered from), it is correct for the total overview, but it is wrong for warehouse 2 which should have been unaffected. This means it is no longer possible to place an order for product A in shop 2 as the available quantity now appears to be out of stock even though there are still 10 in stock! Supply orders appear to be calculated correctly relative to each warehouse. This renders the warehouse based stock management feature unusable for a multishop scenario. Has anyone else found the same thing?

Hello When I upgraded to 1.5.6 I tried the advanced stock management option because that sounded pretty cool and offered additional features like for supplier orders etc. I had to create a warehouse and then allocate stock to that warehouse. All good. However, several things started to go wrong so unfortunately, I had to disable ASM. I thought that was all I had to do and everything would revert to how it was before, but I have just realised that that is not the case, and the problem seems to lie with the work that is done to set up warehouses and stock because when you switch ASM off, those things still remain even though you can't see or control them because they are switched off. A weird thing happened a few days ago, and I found and responded to this thread http://www.prestashop.com/forums/topic/293374-duplicate-shopping-cart-and-orders/page-2 (The feeling is that the problem there has to do with ASM or shopping carts.) Today I discovered another problem, because of the problem in the link above. I needed to change the stock quantity for an item that now has 0 stock because of the issue in the link, however every time I tried to change product > quantity it would say "data being saved" and then the stock would still be 0. So after some searching I find it could be ASM related. So I switch ASM back on again, and try to delete the warehouse, it says you can't because there are products still in it. But ASM is disabled! So presumably to fix this problem, I would need to manually delete all the stock from all the products in the warehouse, so I could then delete the warehouse, and then hopefully I could then adjust my stock manually? I haven't tried this yet because there are hundreds of products with multiple attributes and I just don't have the time right now. Is this how it's supposed to be? Having to make all the stock adjustments manually for 100s, 1000s of products? I'm not sure if this is something that can be done automatically or whether it should be something that people are made aware of when choosing to use ASM or not, but if anyone has a solution for this, I'd really like to know what it is.

I have 2 products in my basket, each one is from a different warehouse assigned with different carriers. When I'm in the 1-page checkout process, both carriers are displayed & have radio buttons. How can I automatically have both carriers selected in this case

Hi, Maybe a tricky one. I have identical products from my warehouse and an overseas warehouse. The local product comes from the overseas warehouse. Can I enter a product in a single listing but allow the customer to select which warehouse (can be listed as Free Shipping | Paid Shipping) they want the product from? The local warehouse has to charge freight but is much faster, the international warehouse is free shipping. I use the Prestashop advanced warehouse functionality so if the item selected is from the local warehouse then 1 is deducted from stock, however, if the international warehouse is selected, then 0 is deducted from the local warehouse. If the overseas option is selected then there is no shipping charge, but if the local product is selected then there is shipping charged at checkout. If this can be done, how is it done? Thanks

Hi. I'm after upgrade from presta 1.3 to 1.5.2 I would like to use that new feature: stock management. What I need to do is associate product with 2 warehouses where I'm holding stock. I can do this for one product without any problem, but how to do it for 400 products with only few clicks? From my calculations I think i need to click around 4000times.... I would like to change settings for all products from quantities>>Available quantities for sale>>I want to specify available quantities manually to I want to use the advanced stock management system for this product and Available quantities for current product and its combinations are based on stock in the warehouses with few clicks as well. Any chance to do that? Or do I need to do everything manually product after product?