Jump to content

AureAure

Members
  • Posts

    41
  • Joined

  • Last visited

Everything posted by AureAure

  1. Bonjour, J'ai eu ce problème récemment, vérifiez chez votre hébergeur que l'envoi de mails ne soit pas bloqué. Dans mon cas chez OVH ça se trouve dans mon hébergement > Plus > Scripts e-mail Si l'état du service est inactif c'est sans doute qu'il y a eu trop de mails qui sont partis (spams) et il faut alors cliquer sur "purger les e-mails" pour que cela fonctionne à nouveau. Il faut aussi installer des captcha pour que ça ne se reproduise plus. Si l'état du service est actif chez votre hébergeur c'est que le problème est différent et je saurais vous aiguiller.
  2. Hi again, I finally found this post on the forum : It doesn't solve the cause of the problem but it let me have a solution. So in my feature values I just replaced the "/" by "/" and the "-" by "﹣" which are similar but different characters, and it works like that. If someone has the same problem, just copy/past the second characters and don't use your keyboard. Thank you again musicmaster and William for your precious help.
  3. Thank you so much musicmaster! I'm not sure I can understand it all because I'm self-taught, but I'm going to try and I'm starting now. By the way, I'm using Prestool and that's so convenient!
  4. Thank you for your help, I'm gonna search for this and keep you informed.
  5. Thank you musicmaster, I made what you said and it helped me to search for the problem. I've been on this days and nights and I've just found the cause: it comes from a file added by my theme owner in order to speed up my site. The file is added to ApPageBuilder module (module used to configure the whole design and theme of my site) : /modules/appagebuilder/libs/LeoOptimization.php I didn't know this file was added, I just deleted it until I contact him to correct it. Now the site displays well (but is slow since the file was used to speed up the site). I would be grateful if you could check if it displays well for you now. Now I still have the issue of faceted search and special characters...
  6. I've been on this problem all the day but couldn't find any solution... Here are some clarifications of what I learned by doing some tests : The problem is that the page doesn't load totally; not just products but also footer as you said, favicon and some css. In fact, the problem occurs with EVERY page of the site, even the home page but only the first time we land on the page. If we go on another page after going on any first one, the second one loads correctly but the first one never, no matter the page. Then if we come back on the first page and refresh it, the first one displays correctly also. I tried to restore the latest changes made to the site, disable some modules, clear all cache... But I couldn't find a solution. In my different browsers (Chrome, Edge, Firefox, Opera) it works fine so I need to use a software testing site to see the problem and it's a little complicated.
  7. Thank you very much William. I managed to reproduce the problem of the 6 products with Edge 88, I need to concentrate on this problem before resolving the other one. I had an error with debug mode and corrected it but the problem still remains. A few notes: - The problem only occurs in the English version of the page. In all other languages it displays correctly. - The problem only occurs in this specific category and not on the other ones - When I clear the site cache and reload the page immediately after, the page displays correctly with all the products. But then the problem comes back again. That's a little weird, I'm making some other tests.
  8. That's really weird, can you please me tell me the versions of Chrome and Edge you are using?
  9. Hello, Thank you very much for having taken the time to look. Juste to understand well : on browsers other than Chrome, you only see 6 products displaying and not 196? I can't reproduce this, for me all my 196 products are displaying on Firefox, Opera, Edge or Chrome. Do you mean the page with one of the filters from faceted search activated? So, you think my problem with the special characters in the faceted search module comes from my theme, right? Or are you talking about this other problem I can't reproduce? Thank you again and sorry for those questions, I'm a bit confused.
  10. Thank you very much for your answer, I put a link if someone can have a look, it would be a great help: https://chwaya.com/en/16-berber-rug
  11. If someone has an idea about it please help me...
  12. Hello, After updating the faceted search module, my features that include special characters (for example the feature "Grey/Black" which includes a "/") do not work in the faceted search module. When I click on it, the page reloads but the filter choice is not taken into account. My other features that do not have special characters (e.g. "Blue") work perfectly. Any idea how to solve this problem apart from removing my special characters or reverting to the previous version? Thank you for your help.
  13. Bonjour, Suite à la mise à jour du module navigation à facettes, mes caractéristiques qui comportent des caractères spéciaux (par exemple la caractéristique "Blanc/beige" qui comporte un "/") ne fonctionnent pas dans la navigation à facettes. Quand je clique dessus, la page se recharge mais le choix du filtre n'est pas pris en compte. Par contre mes autres caractéristiques qui ne comportent pas de caractères spéciaux (par exemple "Bleu") fonctionnent parfaitement. Une idée sur comment résoudre ce problème mis à part enlever mes caractères spéciaux ou revenir à la version précédente ? Merci pour votre aide.
  14. Hmm d'accord, ça me paraît compliqué ! Merci beaucoup pour votre aide, je vais donc garder mon blanc pour le moment en attendant de trouver une meilleure solution.
  15. Merci pour votre réponse. Il y a d'anciennes images que je n'ai pas en 1200x1200, c'est pourquoi j'aimerais afficher directement les images originales qui sont en 1200x1200 pour les nouvelles, 790x790 pour les anciennes. J'imagine que cela doit être possible d'afficher l'image originale au lieu de l'image redimensionnée image_large, non ?
  16. Bonjour, J'ai fait passer mes images large_default en 1200 x 1200 mais certaines sont plus petites, ce qui fait que ça leur ajoute du blanc. Comment faire pour qu'à la place de large_defaut, ce soit les images originales qui apparaissent ? Merci.
  17. J'ai found a solution, I added "|strstr:" to the code instead of "==" for the value condition. So the code is : {block name='product_features'} {if $product.grouped_features} {foreach from=$product.grouped_features item=feature} {if $feature.id_feature == 18 && $feature.value|strstr:"Blue"} <div> My text </div> {/if} {/foreach} {/if} {/block}
  18. J'ai finalement trouvé la solution en ajoutant "|strstr:" au code à la place de "==" pour la condition des valeurs. Ce qui donne : {block name='product_features'} {if $product.grouped_features} {foreach from=$product.grouped_features item=feature} {if $feature.id_feature == 18 && $feature.value|strstr:"Bleu"} <div> Mon texte </div> {/if} {/foreach} {/if} {/block}
  19. Bonjour, Je suis sous PS 1.7.5 et j'essaie d'ajouter du texte aux descriptions de mes produits avec des conditions en fonction de leurs caractéristiques. Je suis parvenue à le faire avec ce code : {block name='product_features'} {if $product.grouped_features} {foreach from=$product.grouped_features item=feature} {if $feature.id_feature == 18 && $feature.value=="Bleu"} <div> Mon texte </div> {/if} {/foreach} {/if} {/block} Ca fonctionne sauf si le produit a plusieurs valeurs de la même caractéristique. Si tel est le cas, rien ne s'affiche. Par exemple avec mon code ci-dessus : Si mon produit a deux valeurs (Bleu et Jaune) de la même caractéristique d'id 18 (Couleur), alors le texte ne s'affiche pas. Si mon produit n'a qu'une seule valeur de cette même caractéristique (Bleu par exemple), le texte s'affiche. Pouvez-vous m'aider à voir ce qui cloche ? Merci beaucoup pour votre aide.
  20. Hello, I'm on PS 1.7.5 and I'm trying to display text on my product descriptions according to the product's features. I managed to do it with this code : {block name='product_features'} {if $product.grouped_features} {foreach from=$product.grouped_features item=feature} {if $feature.id_feature == 18 && $feature.value=="Blue"} <div> My text </div> {/if} {/foreach} {/if} {/block} It works well except if a product has several values from the same feature. Then it doesn't display anything. For exemple with my code above: If my product has two values (Blue and Yellow) from the feature with id 18 (Color), then the text doesn't display. If my product has only one value from this feature (Blue for exemple), it works well. Can someone help me please ? Do someone knows why ? Thank you very much for your help.
  21. Thank you very much for your help, I finally found a solution. I think I copied it wrong with the dot the first time and that it remained in memory despite the fact that I re-entered it correctly.
  22. I found the solution: Limit the display of the widget to category pages AND only to categories with additional descriptions.
  23. Hi Daresh, Thank you for this great module ! It's working very good. However, I tried to add it to the footer so that it can be displayed over the entire width of the page and it's displaying strangely there : the same text of the last category text updated is shown on every category. Do you know if there's a way to make it work well in the footer ? I'm really sorry because you offer a great free module and we keep asking you for issues 🙈 Thank you very much for your help.
  24. If someone has the same problem, it is in /themes/yourtheme/templates/catalog/_partials/active_filters.tpl Simply replace the h1 with a div.
×
×
  • Create New...

Important Information

Cookies ensure the smooth running of our services. Using these, you accept the use of cookies. Learn More